A
-
Abrisham Foroushan Asl, A.
Evaluation of seismic behavior of steel frame combined with lightweight prefabricated panels under reciprocating load [Volume 1, Issue 4, 2007, Pages 233-244]
-
Abutalebi, M.R.
Investigation of Aluminum-Copper-Lithium Alloy Strengthening with Natural and Artificial Aging [Volume 1, Issue 4, 2007, Pages 221-232]
-
Afshar, A.
Investigating new structures from genetic algorithm in optimization
Exploitation of tanks [Volume 1, Issue 2, 2007, Pages 83-88]
-
Afshar, M.H.
Comparison of the results of numerical and laboratory models of one-dimensional flow over dam overflows [Volume 1, special issue, 2006, Pages 1-8]
-
Afshar, M.H.
Applying an evolutionary strategy to optimize structures with continuous variables [Volume 1, Issue 1, 2007, Pages 21-26]
-
Aghabozorg, H.
Crystal Engineering and Molecular Architecture [Volume 1, Issue 3, 2007, Pages 199-220]
-
Agha Najafi, S.
Microcontrol optimization using microfilm with memory feature [Volume 1, Issue 4, 2007, Pages 255-263]
-
Ahmadi, M.
Determination of weight function to analyze the coefficient of stress intensity and fatigue life of thick-walled tanks based on the function of displacement of cracks [Volume 1, special issue, 2006, Pages 43-50]
-
Ahmadi, S.
Investigation of Aluminum-Copper-Lithium Alloy Strengthening with Natural and Artificial Aging [Volume 1, Issue 4, 2007, Pages 221-232]
-
Ali Mohammadi, S.
Sensitivity analysis of penalty function parameters in operating optimization models of multi-purpose tanks [Volume 1, Issue 4, 2007, Pages 265-273]
-
Ali Moradi, F.
Sensitivity analysis of penalty function parameters in operating optimization models of multi-purpose tanks [Volume 1, Issue 4, 2007, Pages 265-273]
-
Aminollahi, H.
Investigate and measure the angular accuracy of ML, MUSIC, Root-MUSIC algorithms and spatial smoothing in signal detection [Volume 1, Issue 3, 2007, Pages 159-166]
-
Arzani, H.
Comparison of the results of numerical and laboratory models of one-dimensional flow over dam overflows [Volume 1, special issue, 2006, Pages 1-8]
-
Azemati, H,R.
Perceptual-behavioral impact of neighborhood open spaces on student health [Volume 1, special issue, 2006, Pages 17-28]
-
Azemati, H.R.
urban parks design and children's creativity development [Volume 1, Issue 1, 2007, Pages 27-37]
-
Azemati, H.R.
Human-environmental approach in landscape architecture design [Volume 1, Issue 2, 2007, Pages 89-96]
-
Azhdari, K.
Determination of weight function to analyze the coefficient of stress intensity and fatigue life of thick-walled tanks based on the function of displacement of cracks [Volume 1, special issue, 2006, Pages 43-50]
B
-
Bagheri, M.
Perceptual-behavioral impact of neighborhood open spaces on student health [Volume 1, special issue, 2006, Pages 17-28]
-
Bagheri, M.
urban parks design and children's creativity development [Volume 1, Issue 1, 2007, Pages 27-37]
-
Bagheri, M.
Human-environmental approach in landscape architecture design [Volume 1, Issue 2, 2007, Pages 89-96]
-
Bozorg hadad, O.
Investigating new structures from genetic algorithm in optimization
Exploitation of tanks [Volume 1, Issue 2, 2007, Pages 83-88]
D
-
Darabi, A.
Three-phase synchronous hysteresis motor control with separation
The variables d and q [Volume 1, Issue 3, 2007, Pages 137-150]
-
Darabi, A.
Dynamic analysis of hysteresis motor permanent magnet synchronous
Considering the effect of Foucault [Volume 1, Issue 4, 2007, Pages 245-254]
-
Dehghan, G.H.
Microcontrol optimization using microfilm with memory feature [Volume 1, Issue 4, 2007, Pages 255-263]
-
Dourandish, A.R
Microcontrol optimization using microfilm with memory feature [Volume 1, Issue 4, 2007, Pages 255-263]
F
-
Feizi, M,
Human-environmental approach in landscape architecture design [Volume 1, Issue 2, 2007, Pages 89-96]
-
Feyzabadi Farahani, M.
Linear stability analysis of two-dimensional boundary layer flow using spectral method [Volume 1, Issue 3, 2007, Pages 127-136]
G
-
Ghadermazi, M.
Crystal Engineering and Molecular Architecture [Volume 1, Issue 3, 2007, Pages 199-220]
-
Ghafarpour Jahromi, S.
Study and comparison of soil stress distribution by numerical method of finite points with other common methods [Volume 1, Issue 2, 2007, Pages 73-82]
-
Gholamali, H.
Study and comparison of soil stress distribution by numerical method of finite points with other common methods [Volume 1, Issue 2, 2007, Pages 73-82]
H
-
Haghollahi, A.
Modeling Abrasion Resistance of Concrete Floors [Volume 1, special issue, 2006, Pages 59-68]
-
Hosseini, M.
Cell design and creating device test to measure radial permeability in rocks [Volume 1, Issue 4, 2007, Pages 275-283]
-
Hosseini, S. B.
Perceptual-behavioral impact of neighborhood open spaces on student health [Volume 1, special issue, 2006, Pages 17-28]
J
-
Jabbari, E.
Sensitivity analysis of penalty function parameters in operating optimization models of multi-purpose tanks [Volume 1, Issue 4, 2007, Pages 265-273]
-
Jafari, H.
Investigating the effect of heat treatment on the fatigue behavior of casting aluminum bronze containing nickel, iron and manganese [Volume 1, Issue 2, 2007, Pages 113-119]
-
Jalali, M.
Investigate and measure the angular accuracy of ML, MUSIC, Root-MUSIC algorithms and spatial smoothing in signal detection [Volume 1, Issue 3, 2007, Pages 159-166]
K
-
Kabir, M.Z
Evaluation of seismic behavior of steel frame combined with lightweight prefabricated panels under reciprocating load [Volume 1, Issue 4, 2007, Pages 233-244]
-
Kalantari, M.
Estimation of the number of users and the market of network data equipment in the upcoming years [Volume 1, Issue 2, 2007, Pages 97-112]
-
Khaje Hosseini, A.H.
Investigating the behavior of concrete beams torsion with longitudinal reinforcement only in the finite element method [Volume 1, Issue 3, 2007, Pages 151-157]
-
Khan alipour, M.
Evaluation of seismic behavior of steel frame combined with lightweight prefabricated panels under reciprocating load [Volume 1, Issue 4, 2007, Pages 233-244]
-
Khodadadi, A.H.
Traffic prioritization in Cellular Mobile Telecommunications systems [Volume 1, special issue, 2006, Pages 29-41]
L
-
Lesani, H,
Three-phase synchronous hysteresis motor control with separation
The variables d and q [Volume 1, Issue 3, 2007, Pages 137-150]
-
Lessani, H.
Dynamic analysis of hysteresis motor permanent magnet synchronous
Considering the effect of Foucault [Volume 1, Issue 4, 2007, Pages 245-254]
M
-
Maghrebi, M.J.
Linear stability analysis of two-dimensional boundary layer flow using spectral method [Volume 1, Issue 3, 2007, Pages 127-136]
-
Mahmoudi Sahebi, M.
Initial evaluation of reinforced concrete bending frames with performance-based design goals [Volume 1, Issue 2, 2007, Pages 65-72]
-
Manteghi, F.
Crystal Engineering and Molecular Architecture [Volume 1, Issue 3, 2007, Pages 199-220]
-
Mazloom, M.
Short-term mechanical properties in high-strength concrete with microsilica [Volume 1, special issue, 2006, Pages 9-15]
-
Mazloom, M.
The effect of microsilica on the setting time of high-strength concrete [Volume 1, Issue 1, 2007, Pages 17-20]
-
Mohammad Nejad, S.
Comparison of TOF, FMCW and Phase-Shift Laser Range-Finding Methods by Simulation and Measurement [Volume 1, special issue, 2006, Pages 51-58]
-
Mohammad Panah, F.
Crystal Engineering and Molecular Architecture [Volume 1, Issue 3, 2007, Pages 199-220]
-
Moodi, F.
Expert system for assessing the failure of concrete slabs
In the Persian Gulf region [Volume 1, Issue 1, 2007, Pages 1-15]
-
Moradi, M.
The performance level of asymmetric steel bracing structures in a direction designed according to the standard 2800 third edition [Volume 1, Issue 4, 2007, Pages 285-294]
-
Morshed, R
Investigating the behavior of concrete beams torsion with longitudinal reinforcement only in the finite element method [Volume 1, Issue 3, 2007, Pages 151-157]
-
Mortazavi, Seyed M.R.
Influence of Prestraining on Tangent Modulus of Tubular Struts [Volume 1, Issue 1, 2007, Pages 49-56]
-
Mozaffar, F.
urban parks design and children's creativity development [Volume 1, Issue 1, 2007, Pages 27-37]
N
-
Nasiri Gheydari, Z.
Three-phase synchronous hysteresis motor control with separation
The variables d and q [Volume 1, Issue 3, 2007, Pages 137-150]
-
Nasiri Gheydari, Z.
Dynamic analysis of hysteresis motor permanent magnet synchronous
Considering the effect of Foucault [Volume 1, Issue 4, 2007, Pages 245-254]
-
Nilforoushan, A.
Bond characherization between concrete substrate and repairing materials [Volume 1, special issue, 2006, Pages 69-76]
-
Noor Alizade, H.
Traffic prioritization in Cellular Mobile Telecommunications systems [Volume 1, special issue, 2006, Pages 29-41]
O
-
Olyaee, S.
Comparison of TOF, FMCW and Phase-Shift Laser Range-Finding Methods by Simulation and Measurement [Volume 1, special issue, 2006, Pages 51-58]
P
-
Paygane, G.H
Microcontrol optimization using microfilm with memory feature [Volume 1, Issue 4, 2007, Pages 255-263]
-
Pourhosseini, R.
Investigating the behavior of concrete beams torsion with longitudinal reinforcement only in the finite element method [Volume 1, Issue 3, 2007, Pages 151-157]
-
Pourkhorshidi, A.
Modeling Abrasion Resistance of Concrete Floors [Volume 1, special issue, 2006, Pages 59-68]
R
-
Rahmani Firooz Jaee, A.
Applying an evolutionary strategy to optimize structures with continuous variables [Volume 1, Issue 1, 2007, Pages 21-26]
-
Ramezanianpour, A. A.
Modeling Abrasion Resistance of Concrete Floors [Volume 1, special issue, 2006, Pages 59-68]
-
Ramezanianpour, A.A.
Expert system for assessing the failure of concrete slabs
In the Persian Gulf region [Volume 1, Issue 1, 2007, Pages 1-15]
-
Ramezanianpour, A.A.
Bond characherization between concrete substrate and repairing materials [Volume 1, special issue, 2006, Pages 69-76]
-
Rastgoo, A.
Determination of weight function to analyze the coefficient of stress intensity and fatigue life of thick-walled tanks based on the function of displacement of cracks [Volume 1, special issue, 2006, Pages 43-50]
-
Reyhani, E.
knots geometry and its training in school [Volume 1, Issue 3, 2007, Pages 167-178]
-
Rezaee, A.
Investigation of Aluminum-Copper-Lithium Alloy Strengthening with Natural and Artificial Aging [Volume 1, Issue 4, 2007, Pages 221-232]
S
-
Sadrolashrafi, M.
Application of science education standards for Iran [Volume 1, Issue 3, 2007, Pages 179-198]
-
Shabakhti, N.
Study and comparison of soil stress distribution by numerical method of finite points with other common methods [Volume 1, Issue 2, 2007, Pages 73-82]
-
Shafie, M.
Investigating new structures from genetic algorithm in optimization
Exploitation of tanks [Volume 1, Issue 2, 2007, Pages 83-88]
-
Shahhosseini, V.
Expert system for assessing the failure of concrete slabs
In the Persian Gulf region [Volume 1, Issue 1, 2007, Pages 1-15]
-
Shahhosseini, V.
Bond characherization between concrete substrate and repairing materials [Volume 1, special issue, 2006, Pages 69-76]
-
Sheikhan, M.
Estimation of the number of users and the market of network data equipment in the upcoming years [Volume 1, Issue 2, 2007, Pages 97-112]
-
Sheshmani, S.
Crystal Engineering and Molecular Architecture [Volume 1, Issue 3, 2007, Pages 199-220]
-
Shirvani Moghadam, S.
Traffic prioritization in Cellular Mobile Telecommunications systems [Volume 1, special issue, 2006, Pages 29-41]
-
Shirvani Moghadam, S.
Investigate and measure the angular accuracy of ML, MUSIC, Root-MUSIC algorithms and spatial smoothing in signal detection [Volume 1, Issue 3, 2007, Pages 159-166]
-
Shirvani Moghaddam, S.
A Novel Handoff Prioritization Scheme Based on Propagation and
Traffic Criteria [Volume 1, Issue 1, 2007, Pages 57-63]
-
Shokouh Far, A.
Investigation of Aluminum-Copper-Lithium Alloy Strengthening with Natural and Artificial Aging [Volume 1, Issue 4, 2007, Pages 221-232]
-
Soltani, A.
Thermobarometry of Ca-amphibole in a Typical Low–temperature I-type Granite from Kashmar, Iran [Volume 1, Issue 2, 2007, Pages 121-126]
T
-
Tabataba Vakili, V.
A Novel Handoff Prioritization Scheme Based on Propagation and
Traffic Criteria [Volume 1, Issue 1, 2007, Pages 57-63]
-
Totonchian, F.
Three-phase synchronous hysteresis motor control with separation
The variables d and q [Volume 1, Issue 3, 2007, Pages 137-150]
-
Totonchian, F.
Dynamic analysis of hysteresis motor permanent magnet synchronous
Considering the effect of Foucault [Volume 1, Issue 4, 2007, Pages 245-254]
Y
-
Yahyaee, M.
The performance level of asymmetric steel bracing structures in a direction designed according to the standard 2800 third edition [Volume 1, Issue 4, 2007, Pages 285-294]
Z
-
Zarghami, A.
Linear stability analysis of two-dimensional boundary layer flow using spectral method [Volume 1, Issue 3, 2007, Pages 127-136]
-
Zomarshidi, H.
Learning to build traditional buildings with building materials: (foundation and wall) [Volume 1, Issue 1, 2007, Pages 39-47]