Quarterly Publication

Document Type : Original Research Paper

Authors

Faculty of Civil Engineering ,Shahid Rajaee Teacher Training University,Tehran,Iran

Abstract

In this paper, A mathematical model for cold rolling of symmetrical tri-layer strip is proposed using the upper bound theorem to investigate the plastic deformation behavior of the strip at the roll gap. With implementation steps to express in order to analysis of cold rolling process, can calculate and forecast the rolling power, rolling force, average pressure between layers and thickness reduction of each layer. In order to validity the theoretical model ,experiments on sandwich strip rolling are conducted by employing aluminum, mild steel (Al/St/Al)as the layers of the sandwich strips and results is compared together. It is found that all of theoretical predictions are in good agreement with the experimental measurements

Keywords

Main Subjects

###### ##### References
مراجع [1] Hwang Y.M., Hsu H.H. and Lee H.J., "Analysis of sandwich sheet rolling by stream function method ", International Journal of Mech. Sci., Vol.37, No.3, 1995, pp. 297–315. [2] Hwang Y.M. and Kiuchi M., "Analysis of asymmetrical complex rolling of multi-layer sheet by upper bound method", Mech.Eng., Vol.13, No.1, 1992, pp. 33–45. [3] Hwang Y.M., Chen T.H. and Hsu H.S., "Analysis of asymmetrical clad sheet rolling by stream function method", International Journal of Mech. Sci.,Vol.38, No.4, 1996, pp. 443–460. [4] Hawkins R. and Wright J.C., " Observation on the deformation properties of sandwich materials ", International Journal of Mech. Sci., Vol.14, 1972, pp. 875–883. نمودار1 اثر کاهش ضخامت بر روی توان نورد نمودار2 اثر کاهش ضخامت بر روی نیروی نورد آموزش آنایلز فرآیند نورد ورقهای سه الیه به کم تئوری حد فوقان عل پورکمای انارک و همکار 226 مجله فناوری آموزش، سال سوم، جلد 3 ،شماره 3 ،بهار 8311 [5] Afonja A.A. and Sansome D.H., "A theoretical analysis of the sandwich rolling process", International Journal of Mech. Sci., Vol. 15, 1973, pp. 1–14. [6] Kiuchi M., Shintani K. and Hwang Y.M., "Mathematical simulation of cold sheet rolling and sandwich sheet rolling ", Ann. CIRP,Vol. 41, 1992, pp. 289–292. [7] Hwang Y.M., Hsu H.H. and Lee H.J., " Analysis of plastic instability during sandwich sheet rolling ", International Journal of Mech.Tools Manuf.,Vol.36, No.1, 1996, pp. 47–62. [8] Avitzur B. and Pachla W., " The upper bound approach to plain strain problems using linear and rotational velocity fields " , Part I. Basic concepts, J. Eng. Ind., Vol.108, 1986, pp. 295–306. [9] Avitzur B. and Pachla W., "The upper bound approach to plain strainproblems using linear and rotational velocity fields ", Part II. Application, J. Eng. Ind., Vol. 108, 1986, pp. 307–316. [10] Danesh Manesh H. and Karimi Taheri A., "The Effect of Annealing Treatment on Mechanical Properties of Aluminum Clad Steel Sheet", Materials & Design, vo1.24, 2003, pp. 617-622. [11] Danesh Manesh H. and Karimi Taheri A., "Bond Strength and Formability of an Aluminum-Clad. Steel Sheet", Journal of Alloys And Compounds, Vo1.361, 2003, pp. 138-143. [12] Danesh Manesh H. and Karimi Taheri A., "Theoretical and experimental investigation of coldrolling of tri-layer strip", Journal of Materials Processing Technology, Vol.166,2005, pp.163–172.