<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>دانشگاه تربیت دبیر شهید رجایی</PublisherName>
				<JournalTitle>فناوری آموزش</JournalTitle>
				<Issn>2008-0441</Issn>
				<Volume>1</Volume>
				<Issue>شماره ویژه</Issue>
				<PubDate PubStatus="epublish">
					<Year>2006</Year>
					<Month>09</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Comparison of the results of numerical and laboratory models of one-dimensional flow over dam overflows</ArticleTitle>
<VernacularTitle>مقایسه نتیجه های مدل عددی وآزمایشگاهی جریان یک بُعدی از روی سرریز سدها</VernacularTitle>
			<FirstPage>1</FirstPage>
			<LastPage>8</LastPage>
			<ELocationID EIdType="pii">1231</ELocationID>
			
<ELocationID EIdType="doi">10.22061/tej.2006.1231</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>محمد هادی</FirstName>
					<LastName>افشار</LastName>
<Affiliation>دانشکده عمران، دانشگاه علم و صنعت ایران،تهران،ایران</Affiliation>

</Author>
<Author>
					<FirstName>حامد</FirstName>
					<LastName>ارزانی</LastName>
<Affiliation>دانشکده فنی ومهندسی ،دانشگاه تربیت دبیر شهید رجایی،تهران،ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>05</Month>
					<Day>19</Day>
				</PubDate>
			</History>
		<Abstract>&lt;br class=&quot;Apple-interchange-newline&quot; /&gt;Analyzing the flow on dams by numerical methods compared to the physical model preparation is the most efficient way to reduce costs and time. &lt;br /&gt;In general the type of method used, flow analysis on overflows in its permanent condition requires solving the category of differential equations involved called Navirastox equations in order to make the free surface of the flow very complex and uneconomical.One type of equation used in overflows is the use of medium depth equation model, or in other words, shallow water equations that result from integrating the Navier-Stokes equations in depth and applying boundary conditions of surface and substrate. Intermediate depth equations, also known as shallow water equations, are mainly used to simulate currents where the velocity value is constant at depth of flow and the pressure distribution at depth is hydrostatic.Due to the complexity of the equations and the lack of a precise answer, different numerical methods have been developed to solve the equations governing the physical phenomena.One of the newest of these methods is the set of methods without a network, which has been introduced in the last two decades to solve differential equations, each of which has its own advantages and disadvantages.&lt;br class=&quot;Apple-interchange-newline&quot; /&gt;Dissociation of the problem in many non-networked methods leads to integral equations, the solution of which requires numerical integralization and the introduction of gaseous points and related weights along with networking.&lt;br class=&quot;Apple-interchange-newline&quot; /&gt;In this paper, the least squares method is used to solve shallow water equations.At least discrete squares have been used in the dissection phase of the differential equation to achieve algebraic equations, as well as the minimum weight squares of the data in order to obtain the values ​​of the form functions.The most important advantage of this method should be considered in eliminating the steps of integrating the process of calculating the matrices of the coefficients and also supporting it without networking in the real sense.Correction of the method has been done by numerical analysis of the flow on the overflow of one of the dams of the country and its comparison with the results related to the speed and water level in the physical model.</Abstract>
			<OtherAbstract Language="FA">&lt;strong&gt;تحلیل جریان روی سرریز سدها به روش های عددی در مقایسه با تهیه مدل فیزیکی، کاراترین روش به منظور کاستن هزینه ها و زمان است. به طورکلی ومستقل ازنوع روش مورد استفاده تحلیل جریان در روی سرریزها در شرایط دائمی آن مستلزم حل دسته معادله های دیفرانسیلی درگیر بنام معادله های ناویراستوکس با منظورکردن سطح آزاد جریان است که بسیار پیچیده و غیراقتصادی است. یکی از انواع معادله های مورد استفاده در سرریزها، استفاده از مدل معادله های میانگین عمقی یا به عبارت دیگر معادله های آبهای کم عمق هستند که از انتگرالگیری معادله های ناویر-استوکس در عمق و اعمال شرایط مرزی سطح و بستر منتج می‌شوند. معادله های میانگین عمقی که بنام معادله های آبهای کم عمق نیز معروفند، به طور عمده برای شبیه‌سازی جریاناتی که مقدار سرعت در عمق جریان ثابت و نیز توزیع فشار در عمق آنها هیدرواستاتیک باشد کاربرد دارند. به علت پیچیدگی معادله های و نیز عدم وجود جواب دقیق، تاکنون روش های عددی متفاوتی برای حل معادله های حاکم بر پدیده های فیزیکی ابداع شده است. یکی از جدیدترین این روش ها مجموعه روش های بدون شبکه است که در دو دهه اخیر برای حل معادله های دیفرانسیل معرفی شده است که هرکدام دارای مزایا و معایب مخصوص به خود هستند. گسسته‌سازی مسأله در بسیاری از روش های بدون‌شبکه به معادله های انتگرالی منجر می شود که حل آنها نیازمند انتگرالگیری عددی و معرفی نقاط گوس و وزنهای مربوط همراه با شبکه‌بندی است. در این مقاله روش حداقل مربعات گسسته برای حل معادله های آبهای کم عمق به کار گرفته       می شود. ازحداقل مربعات گسسته در مرحله گسسته‌سازی معادله دیفرانسیل به منظور دستیابی به معادله های جبری و همچنین از حداقل مربعات وزنی داده‌ها بمنظور دستیابی به مقدارهای تابع های شکل استفاده شده است. مهمترین مزیت این روش را باید در حذف مراحل انتگرال‌گیری از روال محاسبه ماتریسهای ضریب ها و همچنین پشتوانه بدون‌شبکه بودن آن در مفهوم واقعی دانست. درست یابی روش با تحلیل عددی جریان روی سرریز یکی از سدهای کشور و مقایسه آن با نتیجه های مربوط به سرعت و تراز آب در مدل فیزیکی انجام شده است.&lt;/strong&gt;</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">بدون‌شبکه</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">حداقل مربعات گسسته</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">معادله های هذلولوی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">معادله آبهای کم عمق</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jte.sru.ac.ir/article_1231_5e59604428bb85e1b98891284642896c.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه تربیت دبیر شهید رجایی</PublisherName>
				<JournalTitle>فناوری آموزش</JournalTitle>
				<Issn>2008-0441</Issn>
				<Volume>1</Volume>
				<Issue>شماره ویژه</Issue>
				<PubDate PubStatus="epublish">
					<Year>2006</Year>
					<Month>09</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Short-term mechanical properties in high-strength concrete with microsilica</ArticleTitle>
<VernacularTitle>ویژگی های مکانیکی کوتاه مدت در بتن های با مقاومت زیاد دارای میکروسیلیس</VernacularTitle>
			<FirstPage>9</FirstPage>
			<LastPage>15</LastPage>
			<ELocationID EIdType="pii">1232</ELocationID>
			
<ELocationID EIdType="doi">10.22061/tej.2006.1232</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>موسی</FirstName>
					<LastName>مظلوم</LastName>
<Affiliation>دانشکده ی عمران ، دانشگاه تریبت دبیر شهید رجایی،تهران،ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>05</Month>
					<Day>19</Day>
				</PubDate>
			</History>
		<Abstract>In this paper, the effect of microsilica on the short-term mechanical properties of high-strength concrete is discussed. Nowadays, due to the fact that the use of microsilica in high-strength concrete has become very common, it is very important to know the effect of this material on different characteristics of concrete. The relationship between resistance, the sequential elastic modulus and the return elastic modulus is one of the cases discussed in this study.&lt;br /&gt;Another effect has been the length of the wet storage period on the long-term strength of these concretes. In the laboratory work performed in this study, the ratio of water to cement materials and the total amount of cement materials are 0.35 and 500 kg / m3, respectively. The percentage of microsilica substitutes for cement was 0, 6, 8, 10 and 15%. The 28-day strength of the concrete in question was between 58 and 70 megapascals. To study the effect of storage conditions on the long-term resistance of these types of concretes, the 400-day resistance of the samples kept in saturated conditions until the test was compared with the samples stored in these conditions for 7 days.&lt;br /&gt;The result is that long-term processing has little effect on the long-term strength of microsilica concrete. This is not true of microsilica-free concrete. Research on the relationship between resistance and modulus of elasticity and modulus of return elasticity also shows that the model proposed by the ACI 318 regulations does well in these high-strength concretes similar to this research predicts.</Abstract>
			<OtherAbstract Language="FA">&lt;strong&gt;در این مقاله اثر میکروسیلیس روی ویژگی های مکانیکی کوتاه مدت بتن های با مقاومت زیاد مورد بحث قرار می‌گیرد. امروزه با توجه به اینکه استفاده از میکروسیلیس در بتن های با مقاومت زیاد بسیار رایج  گشته است، دانستن اثر این ماده روی ویژگی های متفاوت بتن بسیار &lt;/strong&gt;&lt;strong&gt;ح&lt;/strong&gt;&lt;strong&gt;ائز اهمیت است. ارتباط بین مقاومت، مدول الاستیسیته سکانتی و مدول الاستیسیته بازگشتی یکی از این مورهاست که در این تحقیق به آن پرداخته شده است. مورد دیگر تاثیر طول دوره نگهداری مرطوب روی مقاومت دراز مدت این بتن ها بوده است. در کارهای آزمایشگاهی انجام شده در این پژوهش نسبت آب به مصالح سیمانی و مقدارکل مصالح سیمانی به ترتیب برابر 35/0 و 500 کیلوگرم بر متر مکعب در نظر گرفته شده‌اند. درصد میکروسیلیس جایگزین سیمان برابر0، 6، 8، 10 و 15 درصد بوده است. مقاومت 28 روزه بتن های مورد بحث نیز بین 58 تا 70 مگاپاسکال بوده‌اند. برای مطالعه اثر شرایط نگهداری روی میزان مقاومت دراز مدت این نوع بتن ها، مقاومت 400 روزه نمونه های نگهداری شده در شرایط اشباع تا زمان آزمایش با نمونه های نگهداری شده در این شرایط به مدت 7 روز مقایسه گشته‌اند. نتیجه به دست آمده در این خصوص آن است که عمل آوری طولانی تاثیر چندانی بر روی مقاومت دراز مدت بتن های دارای میکروسیلیس ندارد. این موضوع در مورد بتن های بدون میکروسیلیس این تحقیق درست نیست. تحقیقات انجام شده در خصوص یافتن ارتباط بین مقاومت و مشخصه‌های مدول الاستیسیته و مدول الاستیسیته بازگشتی نیز نشان دهنده ی این موضوع است که مدل پیشنهاد شده به وسیله ی آیین نامه &lt;/strong&gt;&lt;strong&gt;ACI 318 &lt;/strong&gt;&lt;strong&gt; به خوبی این رابطه ها را در بتن های با مقاومت زیاد مشابه این تحقیق پیش بینی می‌کند. &lt;/strong&gt;</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">بتن</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">میکروسیلیس</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مقاومت</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مدول الاستیسیته</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مدول الاستیسیته بازگشتی</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jte.sru.ac.ir/article_1232_26ab9b0e3b8681290e70be8a2fd4088a.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه تربیت دبیر شهید رجایی</PublisherName>
				<JournalTitle>فناوری آموزش</JournalTitle>
				<Issn>2008-0441</Issn>
				<Volume>1</Volume>
				<Issue>شماره ویژه</Issue>
				<PubDate PubStatus="epublish">
					<Year>2006</Year>
					<Month>09</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Perceptual-behavioral impact of neighborhood open spaces on student health</ArticleTitle>
<VernacularTitle>تاثیر ادراکی _ رفتاری فضاهای باز محله در سلامت دانش آموزان</VernacularTitle>
			<FirstPage>17</FirstPage>
			<LastPage>28</LastPage>
			<ELocationID EIdType="pii">1233</ELocationID>
			
<ELocationID EIdType="doi">10.22061/tej.2006.1233</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>سید باقر</FirstName>
					<LastName>حسینی</LastName>
<Affiliation>دانشکده معماری،دانشگاه علم و صنعت،تهران،ایران</Affiliation>

</Author>
<Author>
					<FirstName>حمیدرضا</FirstName>
					<LastName>عظمتی</LastName>
<Affiliation>دانشکده معماری دانشگاه تربیت دبیر شهید رجایی  ،تهران،ایران</Affiliation>

</Author>
<Author>
					<FirstName>محمد</FirstName>
					<LastName>باقری</LastName>
<Affiliation>دانشکده معماری ، دانشگاه هنر اسلامی تبریز،تبریز،ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>05</Month>
					<Day>19</Day>
				</PubDate>
			</History>
		<Abstract>Open urban spaces and contemporary urban neighborhoods are not compatible with the physical and mental characteristics of Iranian male and female students. The per capita restriction of educational spaces in schools threatens the quantitative and qualitative limitation of contemporary residential homes and the prevalence of students&#039; environmental lifestyle machine health patterns. Symptoms such as students&#039; high dependence on horseback riding from home to school, construction of schools without desirable open spaces, expansion of apartment living and housing at least without yard and desirable open spaces, continuous TV viewing, excessive computer use, nutrition patterns Unhealthy and the prevalence of phenomena such as overweight and obesity, social avoidance and depression of some students are a confirmation of the problem of students&#039; environmental health.&lt;br /&gt;In such a situation, improving urban environments and redeveloped spaces can be effective in changing some unhealthy patterns of students&#039; perceptions and behaviors. The present article tries to introduce some of the planning and environmental design capabilities of residential neighborhoods compatible with the growth and physical and mental health of children and adolescents.&lt;br /&gt;&lt;br class=&quot;Apple-interchange-newline&quot; /&gt;Planning and designing pedestrian and bicycle paths from home to school, proper location and design of social schools, planning and design of access networks and connected local sidewalks, planning and design to prevent crime in the neighborhood, traffic calming And expanding neighborhood safety and tranquility, improving and developing neighborhood and neighborhood parks, designing beautiful local streets with environmental design and furniture and natural landscapes and rows of street trees, expanding mixed and diverse local uses and controlling average residential density to In order to increase the access to the services required by students and the socio-local interaction of students, practical solutions are suggested.&lt;br /&gt;Also, the development of specialized interdisciplinary research by programmers and environmental and transportation designers with students&#039; general growth and health specialists is one of the proposed research fields.</Abstract>
			<OtherAbstract Language="FA">&lt;strong&gt;فضاهای باز شهری و محلات شهری معاصر با ویژگی های جسمی و روانی  دانش آموزان دختر و پسر ایرانی سازگاری کافی ندارند. محدودیت سرانه فضاهای آموزشی مدارس, محدودیت کمی و کیفی خانه های مسکونی معاصر و رواج الگوهای زندگی ماشینی  سلامت محیطی دانش آموزان را تهدید می کند. بروز نشانه هایی چون  وابستگی زیاد دانش آموزان به حمل و نقل سواره از خانه  تا مدرسه, ساخت مدارس فاقد فضاهای باز مطلوب, گسترش آپارتمان نشینی و مسکن حداقل  فاقد حیاط و فضاهای باز مسکونی مطلوب, تماشای مداوم تلویزیون, استفاده  مفرط از رایانه, الگوهای تغذیه ناسالم  و شیوع پدیده هایی چون اضافه وزن و چاقی, جامعه گریزی و افسردگی برخی از دانش آموزان تاییدی بر مسأله سلامت  محیطی دانش آموزان هستند. در چنین وضعیتی بهسازی محیط های شهری و فضاهای بازمحله به منظور تغییر برخی از الگوهای ناسالم ادراکی و رفتاری دانش آموزان می تواند موثر باشد. نوشتار حاضر سعی دارد برخی از قابلیت های برنامه ریزی و طراحی  محیطی محلات مسکونی سازگار با رشد وسلامت جسمی و روانی کودکان و نوجوانان دانش آموز را معرفی نماید. برنامه ریزی و طراحی مسیرهای پیاده  و دوچرخه  از خانه تا مدرسه, مکان یابی مناسب و طراحی مدارس اجتماعی, برنامه ریزی و طراحی شبکه های دسترسی و پیاده روهای متصل محلی, برنامه ریزی و طراحی به منظور جلوگیری از وقوع جرم  در محله,آرام سازی ترافیکی و گسترش ایمنی و آرامش محله, بهسازی و توسعه بوستان های همسایگی و محله, طراحی خیابان های محلی زیبا با طراحی محیطی و مبلمان و چشم انداز های طبیعی و ردیف های درختان خیابانی, گسترش کاربری های مختلط و متنوع محلی و کنترل تراکم سکونتی متوسط  به منظور افزایش دسترسی به خدمات مورد نیاز دانش آموزان و تعامل اجتماعی- محلی دانش آموزان از راهکارهای عملی پیشنهادی است. همچنین گسترش تحقیقات تخصصی بین رشته ای برنامه ریزان و طراحان محیط و حمل ونقل با متخصصان رشد و سلامت عمومی دانش آموزان  از زمینه های پژوهشی پیشنهادی می باشند.&lt;/strong&gt;</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">فضای باز محله</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">سلامت محیطی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">طراحی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">دانش آموز</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">کودک</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">و نوجوان</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jte.sru.ac.ir/article_1233_11f83484e62e2773140b21763503d873.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه تربیت دبیر شهید رجایی</PublisherName>
				<JournalTitle>فناوری آموزش</JournalTitle>
				<Issn>2008-0441</Issn>
				<Volume>1</Volume>
				<Issue>شماره ویژه</Issue>
				<PubDate PubStatus="epublish">
					<Year>2006</Year>
					<Month>09</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Traffic prioritization in Cellular Mobile Telecommunications systems</ArticleTitle>
<VernacularTitle>اولویت بندی ترافیکی در سیستمهای مخابرات سیار سلولی</VernacularTitle>
			<FirstPage>29</FirstPage>
			<LastPage>41</LastPage>
			<ELocationID EIdType="pii">1234</ELocationID>
			
<ELocationID EIdType="doi">10.22061/tej.2006.1234</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>شهریار</FirstName>
					<LastName>شیروانی مقدم</LastName>
<Affiliation>دانشکده فنی و مهندسی برق- دانشگاه تربیت دبیر شهید رجایی تهران،ایران</Affiliation>

</Author>
<Author>
					<FirstName>حمید</FirstName>
					<LastName>نور علیزاده</LastName>
<Affiliation>دانشکده فنی- دانشگاه آزاد اسلامی واحد تهران جنوب،ایران</Affiliation>

</Author>
<Author>
					<FirstName>امیر حسین</FirstName>
					<LastName>خدادای</LastName>
<Affiliation>دانشکده تحصیلات تکمیلی- دانشگاه آزاد اسلامی واحد تهران جنوب،تهران،ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>05</Month>
					<Day>19</Day>
				</PubDate>
			</History>
		<Abstract>For cellular mobile users, forced disconnection of a conversation is more undesirable than blocking and rejecting initial communication requests. Various traffic prioritization schemes seek to reduce the forced disconnection of conversations that require channel replacement.&lt;br class=&quot;Apple-interchange-newline&quot; /&gt;In this paper, while reviewing and presenting conventional methods without prioritization, with FIFO and MBPS queuing, with a reserved channel and a combination with queuing and reserved channel, a mobile cellular telecommunication system is considered by considering two types of initial requests and in Now, the connection needs to be replaced, the simulation has been simulated and the results of simulating different methods have been extracted according to the conventional evaluation criteria &quot;probability of forced disconnection&quot; and &quot;probability of blockages&quot; and a comparison has been made between these methods. The results of simulations presented in this study show that the MBPS queuing method is better than the FIFO method and these two methods, while having the possibility of optimal traffic jams, have a much lower probability of forced disconnection than the non-prioritized method.&lt;br class=&quot;Apple-interchange-newline&quot; /&gt;The combined method works better than the reserved channel method because it has the advantages of the reserved channel method and does not have long queues. The results of this study will be useful in selecting the appropriate method and considering the key parameters of each method such as the length of the queue in the queuing methods and the number of channels reserved in the methods based on the reserved channel.</Abstract>
			<OtherAbstract Language="FA">&lt;strong&gt;از نظر کاربران مخابرات سیار سلولی، قطع اجباری یک مکالمه در حال انجام نامطلوبتر از انسداد و رد درخواستهای آغازین ارتباط می باشد. طرحهای مختلف اولویت بندی ترافیکی به دنبال کاهش قطع اجباری مکالمات نیازمند تعویض کانال می باشند. در این مقاله ضمن بررسی و ارائه روشهای مرسوم بدون اولویت بندی، با صف بندی &lt;/strong&gt;&lt;strong&gt;FIFO&lt;/strong&gt;&lt;strong&gt;&lt;strong&gt;[1]&lt;/strong&gt;&lt;/strong&gt;&lt;strong&gt; و &lt;/strong&gt;&lt;strong&gt;MBPS&lt;/strong&gt;&lt;strong&gt;&lt;strong&gt;[2]&lt;/strong&gt;&lt;/strong&gt;&lt;strong&gt;، با کانال رزرو شده و ترکیبی با صف بندی و کانال رزرو شده، یک سیستم مخابرات سیار سلولی با در نظر گرفتن دو نوع درخواست آغازین ارتباط و در حال ارتباط نیازمند تعویض کانال، شبیه سازی شده و نتایج حاصل از شبیه&lt;/strong&gt;&lt;strong&gt; &lt;/strong&gt;&lt;strong&gt;سازی روشهای مختلف با توجه به معیارهای ارزیابی مرسوم &quot;احتمال قطع اجباری&quot; و &quot;احتمال راه بندان&quot; استخراج گردیده و مقایسه&lt;/strong&gt;&lt;strong&gt; &lt;/strong&gt;&lt;strong&gt;ای بین این روشها صورت گرفته است. نتایج حاصل از شبیه&lt;/strong&gt;&lt;strong&gt;‌&lt;/strong&gt;&lt;strong&gt;سازیهای ارائه شده در این تحقیق نشان می دهند که روش صف بندی &lt;/strong&gt;&lt;strong&gt;MBPS&lt;/strong&gt;&lt;strong&gt; بهتر از &lt;/strong&gt;&lt;strong&gt;FIFO&lt;/strong&gt;&lt;strong&gt; و این دو روش در عین داشتن احتمال راه بندان مطلوب، به مراتب احتمال قطع اجباری کمتری نسبت به روش بدون اولویت بندی دارند. روش ترکیبی نیز بهتر از روش کانال رزرو شده عمل می نماید زیرا هم مزایای روش کانال رزرو شده را دارد و هم دارای صفهای طولانی نیست. نتایج این تحقیق در انتخاب روش مناسب و در نظر گرفتن &lt;/strong&gt;&lt;strong&gt;پارامترهای&lt;/strong&gt;&lt;strong&gt; کلیدی هر روش نظیر طول صف در روشهای صف بندی و تعداد کانالهای رزرو شده در روشهای مبتنی بر کانال رزرو شده، مفید خواهند بود.&lt;/strong&gt;&lt;br /&gt; &lt;br clear=&quot;all&quot; /&gt;&lt;br /&gt; &lt;br /&gt; [1]. First In First Out&lt;br /&gt; &lt;br /&gt; &lt;br /&gt; [2]. Measurement Based Prioritization Scheme</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">مخابرات سیار سلولی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">ارلانگ</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">پواسن</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">نمایی منفی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">تعویض کانال</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">راه بندان</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">قطع اجباری</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">اولویت بندی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">صف بندی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">کانال رزرو شده</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">FIFO</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">MBPS</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jte.sru.ac.ir/article_1234_28e8d4689eac2bda66db694d78509ee7.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه تربیت دبیر شهید رجایی</PublisherName>
				<JournalTitle>فناوری آموزش</JournalTitle>
				<Issn>2008-0441</Issn>
				<Volume>1</Volume>
				<Issue>شماره ویژه</Issue>
				<PubDate PubStatus="epublish">
					<Year>2006</Year>
					<Month>09</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Determination of weight function to analyze the coefficient of stress intensity and fatigue life of thick-walled tanks based on the function of displacement of cracks</ArticleTitle>
<VernacularTitle>تعیین تابع وزنی برای تحلیل ضریب شدت تنش و عمر خستگی مخازن جدار ضخیم برمبنای تابع جابجایی صفحه های ترک</VernacularTitle>
			<FirstPage>43</FirstPage>
			<LastPage>50</LastPage>
			<ELocationID EIdType="pii">1250</ELocationID>
			
<ELocationID EIdType="doi">10.22061/tej.2006.1250</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>عباس</FirstName>
					<LastName>راستگو</LastName>
<Affiliation>گروه مکانیک،دانشگاه تهران،تهران،ایران</Affiliation>

</Author>
<Author>
					<FirstName>کامران</FirstName>
					<LastName>اژدری</LastName>
<Affiliation>گروه مکانیک،دانشگاه تهران،تهران،ایران</Affiliation>

</Author>
<Author>
					<FirstName>مهدی</FirstName>
					<LastName>احمدی</LastName>
<Affiliation>دانشگاه صنعتی اصفهان،اصفهان،ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>05</Month>
					<Day>19</Day>
				</PubDate>
			</History>
		<Abstract>Determining the stress intensity coefficient is the main parameter in reservoir design, and what in the linear failure mechanism controls the crack behavior is the value of the stress intensity coefficient. There are different ways to estimate this value. The weight function method is widely used as one of the stress intensity estimation methods. In this paper, the weight function based on estimating the crack displacement function is obtained using modeling in software in a specific geometry of the ball tube. Then, using the weight function, the stress intensity coefficient and the fatigue life of the ball tube in the case of autophagy, using the actual behavior of the material, are obtained and compared with the available results. The method presented in this paper is a general method that can be applied to any geometry of the tank with any number of internal or external cracks and any relative length of cracks.</Abstract>
			<OtherAbstract Language="FA">&lt;strong&gt;تعیین ضریب شدت تنش پارامتر اصلی در طراحی مخازن است و آنچه که در مکانیک شکست خطی، کنترل کننده رفتار ترک است مقدار ضریب شدت تنش است. روش های متفاوتی برای تخمین این مقدار وجود دارد.  روش تابع وزنی به عنوان یکی از روش های تخمین ضریب شدت تنش به طور گسترده ای مورد استفاده قرار می گیرد. در این مقاله تابع وزنی بر مبنای تخمین تابع جابجایی ترک با استفاده از مدل سازی در نرم افزار  در یک هندسه خاص لوله توپ به دست آورده شده است. سپس با استفاده از تابع وزنی، ضریب شدت تنش و عمر خستگی لوله توپ در حالت وجود اتوفریتاژ با استفاده از رفتار واقعی ماده به دست آمده و با نتیجه های موجود مقایسه شده است. روش ارایه شده در این مقاله یک روش کلی بوده که برای هر هندسه مخزن با هر تعداد ترک داخلی یا خارجی و هر طول نسبی ترک قابل اعمال است.&lt;/strong&gt;</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">ﻣﺨﺎزن ﺟﺪار ﺿﺨﯿﻢ</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">ﺿﺮﯾﺐ ﺷﺪت ﺗﻨﺶ</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">ﺗﺎﺑﻊ ﺟﺎ ﺑﻪ ﺟﺎﯾﯽ</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">ﺗﺎﺑﻊ وزﻧﯽ</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jte.sru.ac.ir/article_1250_ca037ba2c3812655b245e28dd28e90dd.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه تربیت دبیر شهید رجایی</PublisherName>
				<JournalTitle>فناوری آموزش</JournalTitle>
				<Issn>2008-0441</Issn>
				<Volume>1</Volume>
				<Issue>شماره ویژه</Issue>
				<PubDate PubStatus="epublish">
					<Year>2006</Year>
					<Month>09</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Comparison of TOF, FMCW and Phase-Shift Laser Range-Finding Methods by Simulation and Measurement</ArticleTitle>
<VernacularTitle>مقایسه روشهای یافتن محدوده لیزر TOF ، FMCW و Phase-Shift با شبیه سازی و اندازه گیری</VernacularTitle>
			<FirstPage>51</FirstPage>
			<LastPage>58</LastPage>
			<ELocationID EIdType="pii">1236</ELocationID>
			
<ELocationID EIdType="doi">10.22061/tej.2006.1236</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>سعید</FirstName>
					<LastName>علیایی</LastName>
<Affiliation>دانشگاه تربیت دبیر شهید رجایی،تهران،ایران</Affiliation>

</Author>
<Author>
					<FirstName>شهرام</FirstName>
					<LastName>محمد نژاد</LastName>
<Affiliation>دانشگاه علم و صنعت ایران،تهران،ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>05</Month>
					<Day>19</Day>
				</PubDate>
			</History>
		<Abstract>&lt;strong&gt;Since 1970s the use of laser based range-finders has become a necessary part of many military and domestic systems. According to the needs and the circumstances, many different types of such systems have been developed and their technologies are adapted to the local needs. Distance or displacement measurement in the medium range is mainly divided to three groups; time of flight, frequency modulation continuous wave, and phase-shift laser range finder. In this paper we present the design, implementation and/or simulation of three such systems and compare their characteristics.&lt;/strong&gt;</Abstract>
			<OtherAbstract Language="FA">از دهه 1970 استفاده از یابهای مبتنی بر لیزر به بخشی ضروری در بسیاری از سیستمهای نظامی و داخلی تبدیل شده است. با توجه به نیازها و شرایط ، انواع مختلفی از اینگونه سیستم ها ایجاد شده و فن آوری های آنها با نیازهای محلی سازگار شده است. اندازه گیری فاصله یا جابجایی در محدوده متوسط ​​عمدتا به سه گروه تقسیم می شود. زمان پرواز ، موج مداوم مدولاسیون فرکانس و فاصله یاب لیزر فاز تغییر. در این مقاله طراحی ، پیاده سازی و / یا شبیه سازی سه سیستم از این دست ارائه شده و ویژگی های آنها از دهه 1970 استفاده از یابهای مبتنی بر لیزر به بخشی ضروری در بسیاری از سیستمهای نظامی و داخلی تبدیل شده است. با توجه به نیازها و شرایط ، انواع مختلفی از اینگونه سیستم ها ایجاد شده و فن آوری های آنها با نیازهای محلی سازگار شده است. اندازه گیری فاصله یا جابجایی در محدوده متوسط ​​عمدتا به سه گروه تقسیم می شود. زمان پرواز ، موج مداوم مدولاسیون فرکانس و فاصله یاب لیزر فاز تغییر. در این مقاله طراحی ، پیاده سازی و / یا شبیه سازی سه سیستم از این دست ارائه شده و ویژگی های آنها را با هم مقایسه می کنیم.را با هم مقایسه می کنیم.</OtherAbstract>
<ArchiveCopySource DocType="pdf">https://jte.sru.ac.ir/article_1236_8910e236af4d861b8719d0db6228525d.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه تربیت دبیر شهید رجایی</PublisherName>
				<JournalTitle>فناوری آموزش</JournalTitle>
				<Issn>2008-0441</Issn>
				<Volume>1</Volume>
				<Issue>شماره ویژه</Issue>
				<PubDate PubStatus="epublish">
					<Year>2006</Year>
					<Month>09</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Modeling Abrasion Resistance of Concrete Floors</ArticleTitle>
<VernacularTitle>مدل سازی مقاومت در برابر سایش کف بتونی</VernacularTitle>
			<FirstPage>59</FirstPage>
			<LastPage>68</LastPage>
			<ELocationID EIdType="pii">1235</ELocationID>
			
<ELocationID EIdType="doi">10.22061/tej.2006.1235</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>علی اکبر</FirstName>
					<LastName>رمضانیان پور</LastName>
<Affiliation>دانشگاه امیرکبیر</Affiliation>

</Author>
<Author>
					<FirstName>عباس</FirstName>
					<LastName>حق اللهی</LastName>
<Affiliation>دانشگاه تربیت دبیر شهید رجایی</Affiliation>

</Author>
<Author>
					<FirstName>علیرضا</FirstName>
					<LastName>پورخورشیدی</LastName>
<Affiliation>دانشگاه صنعتی امیرکبیر</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>05</Month>
					<Day>19</Day>
				</PubDate>
			</History>
		<Abstract>&lt;strong&gt;Abrasion of industrial concrete floors is a major problem resulting in their lower service lives. Attempt has been made to relate the abrasion resistance of concrete to its compressive strength. However there are other factors which influence the abrasion resistance of concrete. &lt;/strong&gt; &lt;br /&gt;&lt;strong&gt;In this study, several concrete mixtures containing different types of cements, aggregates, admixtures and additives such as silica fume and styrene butadiene rubber (S.B.R) polymer were made to assess their abrasion resistances. All concrete specimens were tested for wear action in accordance with ASTM and EN standard test methods. Based on data obtained from the tests, an empirical model was proposed to evaluate the abrasion resistance of different concretes. &lt;/strong&gt; &lt;br /&gt;&lt;strong&gt;Results of this investigation show that the incorporation of silica fume, S.B.R polymer and granite aggregates in concrete improve its abrasion resistance. The proposed mathematical model is capable to predict the abrasion resistance of concrete and provide a guide for selection of materials to produce more durable concrete when subjected to wear action. &lt;/strong&gt; &lt;br /&gt; </Abstract>
			<OtherAbstract Language="FA">ساییدگی کف بتن های صنعتی یک مشکل اساسی است که باعث پایین آمدن عمر آنها می شود. تلاش شده است تا مقاومت در برابر سایش بتن با مقاومت فشاری آن مرتبط شود. با این وجود عوامل دیگری نیز وجود دارد که در مقاومت در برابر سایش بتن موثر است.&lt;br /&gt; در این مطالعه ، چندین مخلوط بتونی حاوی انواع مختلف سیمان ، سنگدانه ، مواد افزودنی و مواد افزودنی مانند دود سیلیس و استایرن لاستیک بوتادین (S.B.R) پلیمر برای ارزیابی مقاومت در برابر سایش آنها ساخته شد. تمام نمونه های بتنی مطابق با روش های استاندارد استاندارد ASTM و EN برای عمل سایش مورد آزمایش قرار گرفتند. بر اساس داده های به دست آمده از آزمایشات ، یک مدل تجربی برای ارزیابی مقاومت در برابر سایش بتن های مختلف ارائه شده است.&lt;br /&gt; نتایج این تحقیق نشان می دهد که ترکیب ذرات سیلیس ، پلیمر S.B.R و مصالح گرانیتی در بتن باعث بهبود مقاومت در برابر سایش می شود. مدل ریاضی پیشنهادی قادر به پیش بینی مقاومت در برابر سایش بتن است و راهنمایی برای انتخاب مواد جهت تولید بتن با دوام بیشتر در هنگام قرار گرفتن در معرض سایش فراهم می کند.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">مقاومت در برابر سایش</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">بتن</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">دوام</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">کف صنعتی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مدل ریاضی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">دود سیلیس</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">لاستیک استایرن بوتادین (S.B.R) پلیمر</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jte.sru.ac.ir/article_1235_4446aaf85818b393423c4f7d00038ece.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه تربیت دبیر شهید رجایی</PublisherName>
				<JournalTitle>فناوری آموزش</JournalTitle>
				<Issn>2008-0441</Issn>
				<Volume>1</Volume>
				<Issue>شماره ویژه</Issue>
				<PubDate PubStatus="epublish">
					<Year>1385</Year>
					<Month>07</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Bond characherization between concrete substrate and repairing materials</ArticleTitle>
<VernacularTitle>خصوصیات اتصال بین بستر بتونی و مواد ترمیم کننده</VernacularTitle>
			<FirstPage>69</FirstPage>
			<LastPage>76</LastPage>
			<ELocationID EIdType="pii">1244</ELocationID>
			
<ELocationID EIdType="doi">10.22061/tej.2006.1244</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>علی اکبر</FirstName>
					<LastName>رمضانیانپور</LastName>
<Affiliation>گروه مهندسی عمران ، دانشگاه صنعتی امیرکبیر ، تهران،ایران</Affiliation>

</Author>
<Author>
					<FirstName>وحید</FirstName>
					<LastName>شاه حسینی</LastName>
<Affiliation>مهندسی و مدیریت ساخت و ساز ، دانشگاه صنعتی امیرکبیر،تهران،ایران</Affiliation>

</Author>
<Author>
					<FirstName>آ</FirstName>
					<LastName>نیلفروشان</LastName>
<Affiliation>مهندسی و مدیریت ساخت و ساز ، دانشگاه صنعتی امیرکبیر ، تهران ، ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>1399</Year>
					<Month>03</Month>
					<Day>02</Day>
				</PubDate>
			</History>
		<Abstract>The purpose of this investigation was to study the effect of bonding behavior of concrete substrate and repair materials. Three different cementitious or modified-cementitious repair materials and three surface roughnesses were studied. Repair materials were ordinary mortar, modified cementitious mortar by silica fume and modified cementitious mortar by styrene butadiene rubber latex. Surface preparations were smooth surface, rough surface and epoxy resin adhesive as a bonding agent. The method used for evaluation of bond strength was pull-off test. the influence of the electrical conductivity of repairing materials was analyzed by rapid chloride permeability test. Finally, the performance of the adhesives was evaluated considering both the bond strength and electrical conductivity. &lt;br /&gt;Results obtained from these tests indicated that the roughness of substrate surface has a main effect on the performance of bond between adhesives and concrete. There are not great differences in bonding strength between various repairing materials but considering electrical conductivity, modified cementitious mortars are better materials for using in corrosive environments to increase service life of repaired structures</Abstract>
			<OtherAbstract Language="FA">هدف از این تحقیق بررسی تأثیر رفتار باندینگ بستر بتونی و مواد ترمیم شده است. سه ماده تعمیر سیمانی متفاوت یا اصلاح شده با سیمان و سه زبری سطح مورد بررسی قرار گرفت. مواد ترمیمی ملات معمولی ، ملات سیمانی اصلاح شده توسط دود سیلیس و ملات سیمانی اصلاح شده توسط لاتکس لاستیکی بوتادین استایرن بودند. سطح آماده سازی سطح صاف ، سطح خشن و چسب رزین اپوکسی به عنوان ماده اتصال دهنده بود. روش مورد استفاده برای ارزیابی استحکام باند ، آزمون کشش بود. تأثیر هدایت الکتریکی مواد ترمیم کننده با استفاده از تست نفوذپذیری سریع کلرید انجام شد. سرانجام ، عملکرد چسب ها با توجه به مقاومت باند و هدایت الکتریکی مورد بررسی قرار گرفت.&lt;br /&gt;نتایج به دست آمده از این آزمایشات نشان داد که زبری سطح بستر تأثیر اصلی در عملکرد پیوند بین چسب و بتن دارد. در استحکام باندینگ بین مواد مختلف تعمیر کننده تفاوت زیادی وجود ندارد ، اما با توجه به هدایت الکتریکی ، ملات های اصلاح شده سیمانی مواد بهتری برای استفاده در محیط های خورنده برای افزایش طول عمر سازه های تعمیر شده هستند.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">مقاومت اتصالی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مواد ترمیم کننده</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">زبری</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">آزمون بیرون کشیدگی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">نفوذپذیری کلورید</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">بتن</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jte.sru.ac.ir/article_1244_8fa0b7572a71b897facb87c667ee679e.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
